Many users got the Kitkat update via OTA but there are still many more users who are stuck with the Jellybean. So, all the users who didn’t get the 4.4.2 OS update on their tablet till now can Update Galaxy Note 10.1 GT-N8010 to 4.4.2 Kitkat Official firmware manually through this guide. The process here is easy and official. You will not lose your warranty. However, the process should be done by an advance user who is familiar of this kind of manual update process. The firmware that we will flash on Galaxy Note 10.1 N8010 is Kitkat Official with Build No N8010XXUDNF3. Kitkat OS for Note 10.1 brought many new changes and features. The User Interface, animations, performance, features and overall design is changed now. Kitkat is different from previous OS versions. The status bar is changed, lock screen is modified with separate widgets screen, camera is changed, touch buttons are rearranged and many other changes have been noticed. The guide to manually update your Galaxy Note 10.1 Wi-Fi N8010 to Kitkat Official firmware is explained below. You can do this procedure on any unlocked Galaxy Note 10.1 N8010, as the firmware is official so it can be installed on any Galaxy Note 10.1 N8010 in any region. We will use Odin for installing the firmware on the device. Odin is the official tool of Samsung to flash firmwares and other update files on its android devices. You should only do this process if you are familiar with this. Otherwise you may mess up your tablet. Before proceeding read the Disclaimer and necessary instructions. Device:                    Galaxy Note 10.1 (2012) Wi-Fi Model:                     GT-N8010 OS Version:           4.4.2 Kitkat Country:                 United Arab Emirates Product Code:      XSG PDA:                          N8010XXUDNF3 CSC:                           N8010OJVDNF3 Download GTA San Andreas Free for Anroid

The following method is only for Galaxy Note 10.1 model no GT-N8010. Do not try this on any other model. You should only do this if you are aware on this kind of process. Remember that if something wrong happens with your device during or after the process then will not be held responsible. The firmware is official so you will not lose your device’s warranty. Root Access, if have, will be gone after the installing the firmware, Thanks.

Before you proceed to update Galaxy Note 10.1 Gt-N8010 to 4.4.2 Kitkat. You should  make some preparations below.

Galaxy Note 10.1 GT-N8010 A PC or a Laptop Proper Working USB Data Cable

N8010XXUDNF3 4.4.2 Kitkat OS for Note 10.1 N8010 Odin v3.09 Samsung USB Drivers


Download the Kitkat OS on your PC from above link and extract it. You will get a tar.md5 file after extracting the firmware. Download Odin v3.09 from the above link and extract it too.


On your tablet go to Settings»Developer Options, scroll down and enable USB Debugging Mode. If you don’t find developer options in the settings then you can activate them by going to Settings»About Phone and tapping on Build No seven times.


After that turn off your tablet.


While your tablet is off, enter into download mode by pressing and holding Volume Down+Power button and release when the warning screen appears. Now press the volume up button from the warning screen to get into download mode.


Now launch Odin flash tool on your computer.


Connect you Galaxy Note 10.1 to the computer. Odin will detect your device and ID:COM box in Odin will turn blue after the successful connection between computer and your device.


After that, click on the AP button in the Odin and choose the extracted 4.4.2 Kitkat firmware file which is in tar.md5 format. Ensure that no other options except Auto Reboot and F.Reset Time are enabled in Odin.


Review the whole process again for any mistakes and errors. After all is set, click on the Start button to begin the process.

Note: If Odin stops at any point then unplug the device, close Odin, run Odin again, reconnect the device and do the process again.


After clicking on the start button. Odin will start installing the firmware on the device. It will take some time to complete so wait till the process competes. After the completion of the process Odin will show PASS message on the screen.


Your device will now restart automatically. Disconnect the cable and wait. At first start-up it would take some time to show up the home screen. So have patience till the device fully starts. And All Done!!!

By doing the above process you have updated your device to the latest 4.4.2 Kitkat OS. Head over to Settings»About Phone to check the new OS version running on your device. Hope your like our tutorial to Update Galaxy Note N8010 to 4.4.2 Kitkat official firmware. If you have any problems or questions regarding this then ask freely in the comments sections below.

Fix if Device Stops at Boot Screen

If your device fails to show up the home screen and doesn’t get any further from the boot screen or Samsung logo then you should reset your device from the recovery menu to solve this problem. The problem is common and occurs to most of the phones after update. Go to the link below to get full instructions to solve this problem. Fix if device stucks at Boot Logo So, that was all for today. Will meet you again. Bye!! Please like, share and subscribe. Comment to share your thoughts. Follow on twitter, facebook, GooglePlus