Apart from its features and usage Galaxy Note 10.1 also has amazing specs. It has 10.1 inch IPS display with resolution of 1280×800 pixels. Processor of Galaxy Note 10.1 Exynos 5410 Quad Core 1.4 GHz, Ram is 2 GB and storage is 16/32/64 GB exapand able by a 64 GB micro SD Card. The tablets comes in different varianrts in GSM and Non-GSM. Coming to the OS history of Galaxy Note 10.1, it got only 2 major updates of jelly bean and Kitkat. We all know Samsung is a little lazy in pushing updates for its devices but never mind. The initial models of Galaxy Note 10.1 came with 4.0.4 ICS and some newer models came with 4.1.2 jellybean. All which were on 4.0.4 were also updated to 4.1.2 Jelly bean. It didn’t got any further update for a while. After a long time Samsung Pushed 4.4.2 Kitkat update for Galaxy Note 10.1 in June. This was the last update for Galaxy Note 10.1 and it will not get any further updates after Kitkat.

  By knowing that Galaxy Note 10.1 will not get any further update after kitkat there has been an increase in custom roms of Galaxy Note 10.1. Many users want to try something different after spending sometime with stock firmware. So the only option for this is to install the Custom rom and it is only possible to install a Custom rom if you have some Custom recovery installed on your device. So today guys i will show you to install CWM Custom recovery on Galaxy Note 10.1 GT-N8000. Basically a custom recovery has many functions. We can do a lot of tweaks using custom recovery. We can install custom roms, update files, make the full backup of device, wipe the caches of the whole system etc. So custom recovery is very useful for many purpose. You can install CWM custom recovery on your tablet by following the instructions below.

If you have not rooted your phone then you can refer to the link below to root your Galaxy Note 10.1 N8000.

Root Galaxy Note 10.1 N8000 CWM touch Recovery N8000 Odin v3.09 Samsung USB Drivers


Extract the downloaded CWM recovery to get a tar.md5 file extension. Extract the Odin.zip.


Now on your device go to Settings»Developer Options scroll down and enable USB debugging mode. If Developer Options are not available then you can activate them by going to Settings»About Phone and tap on Build Number seven times repeatedly.



Now turn off your Galaxy Note 10.1. Enter into download mode by pressing and holding Volume Down+Power button for a few seconds. A warning screen will appear press the volume up button to confirm the task.



Launch Odin on your computer as an Administrator.


Connect your Galaxy Note 10.1 to the PC through a USB data cable.


ID:COM in Odin will be highlighted after the connection is established.



In Odin click on PDA or AP option and select the cwm recovery tat.md5 file which you extracted.


The Auto Reboot and F.Reset time options should be enabled in Odin.


Check the whole procedure again for mistakes and errors.


Click on the start button to begin. The Odin will start flashing the recovery.

After the completion of the process Odin will show the Pass message and your device will automatically reboot. Disconnect the cable when you see the home screen.

  Congratulation guys you have now installed CWM custom recovery on your Galaxy Note 10.1. Enjoy custom roms and do whatever you can on your device. Thanks to all of you who followed my tutorial. For checking the custom recovery you can boot onto recovery mode by doing the following method. After the above process your device will boot into recovery mode. You will see the new ClockworkMod recovery.You can scroll down by volume button and select by power button. Now select Reboot System now if you would like to get out of the Recovery mode.

So that was it, our guide to Install CWM Custom Recovery on Galaxy Note 10.1 GT-N8000 ends here. Hope you all liked this. //Bye !! Like, share and subscribe for more. If you have any problems comment below, i will try to help